DTC P0507: Idle Air Control (IAC) System Rpm Higher Than Expected
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2010 Mercury Mountaineer, 2010 Mercury Milan, 2010 Mercury Mariner, 2010 Mercury Grand Marquis, and 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
DTC P0507: IDLE AIR CONTROL (IAC) SYSTEM RPM HIGHER THAN EXPECTED
| For Vehicles With An Idle Air Control (IAC) Valve | |||
| Description: | This DTC sets when the powertrain control module (PCM) detects an engine idle speed that is greater than the desired RPM. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Disconnect the IAC valve and look for little or no change in engine RPM as an indication of a stuck or damaged valve. | ||
| For All Others: - | |||
| Description: | This DTC sets when the powertrain control module (PCM) detects an engine idle speed that is greater than the desired RPM. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | This DTC is informational only and it may be accompanied by other DTCs. Diagnose other DTCs first. If no other DTCs are present, inspect the intake air system for air restrictions, vacuum leaks, and damage. If no concerns are present, clear the DTC and repeat the self-test. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| Ranger | GO to PINPOINT TEST KE . | ||
| All others | Refer to the Description, Possible Causes and Diagnostic Aids for the appropriate DTC. | ||