DTC P0107: Manifold Absolute Pressure (Map)/Barometric Pressure (BARO) Sensor Low
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2010 Mercury Mountaineer, 2010 Mercury Milan, 2010 Mercury Mariner, 2010 Mercury Grand Marquis, and 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
DTC P0107: MANIFOLD ABSOLUTE PRESSURE (MAP)/BAROMETRIC PRESSURE (BARO) SENSOR LOW
| Description: | MAP sensor operating voltage is below the minimum calibrated parameter of 0.024 volt. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | The VREF voltage should be between 4.0 and 6.0 volts. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| Flex GTDI, MKS 3.5L, MKT 3.5L, Taurus GTDI |
GO to PINPOINT TEST DN . | ||
| All others | GO to PINPOINT TEST DM . | ||