Cold Start Engine Speed Monitor Operation
WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2010 Mercury Milan, 2010 Mercury Mariner, 2010 Mercury Grand Marquis, 2010 Lincoln Town Car, and 2010 Lincoln Navigator L. However, it is still accessible from the selected car via links, so may be relevant.
Once the waiting period is complete, the monitor compares the average difference between desired and commanded spark to a calibratable threshold that is a function of ECT at start. If the difference exceeds the calibrated threshold, a DTC is set.
- DTC: P050A cold start idle air control system performance
- Monitor execution: Once per driving cycle, during the first 15 seconds of a cold start
- Monitor sequence: None
- Monitoring duration: Data gathering occurs during the first 15 seconds of a cold start. The decision to set P050A is made 300 seconds after start. This delay gives time for other diagnostics (for example, misfire monitor) to determine if another DTC should set instead of P050A.