P2801 - Transmission Range Sensor B Circuit Range/Performance
WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
P2801 - TRANSMISSION RANGE SENSOR B CIRCUIT RANGE/PERFORMANCE
| Description: | The powertrain control module (PCM) checks the gear selector position by monitoring two independent voltage signals from the transmission range (TR) sensor. The TR voltages are then compared to an allowed voltage range for each gear. The test fails when the compared voltages are out of range. This DTC indicates that two or more TR signals are low or high. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | See the diagnostic aids for DTC P2800 . | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST TA . | ||