Description And Operation: Geartrain: Notes
WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
Power is transmitted from the torque converter to the geartrain components through the input shaft and forward clutch cylinder.
- By holding or driving certain members of the gearset, 5 forward ratios and 1 reverse ratio are obtained and transmitted to the output shaft. The ratios are as follows:
| Gear Ratio | |
|---|---|
| 1st | 3.114 to 1 |
| 2nd | 2.202 to 1 |
| 3rd | 1.545 to 1 |
| 4tha | 1.096 to 1 |
| 5tha | 1 to 1 |
| 6tha | 0.707 to 1 |
| Reverse | 2.88 to 1 |
a Special operating strategy is enabled when transmission temperature is less than -15°C (5°F).