LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 1302 (Automatic Transmission - 5R110W (TORQSHIFT(R))) >> Description And Operation >> Geartrain >> Input Shaft >> Output Shaft

Output Shaft

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

The output shaft is supported by a press fit radial bearing in the extension housing. It is positioned by a bushing in the forward clutch cylinder, which in turn is positioned by the case center support and the center shaft.

scientia non olet · About LEMON Manuals