LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 1301 (Climate Control) >> Removal And Installation >> Clutch and Clutch Field Coil >> Removal

Clutch and Clutch Field Coil: Removal

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the A/C compressor. For additional information, refer to Air Conditioning (A/C) Compressor - 4.6L, 5.4L, and 6.8L  or Air Conditioning (A/C) Compressor - 6.0L Diesel .
  2. Remove the A/C clutch disc and hub bolt.
    1. Using the special tool, hold the A/C clutch disc and hub.
    2. Remove the A/C clutch disc and hub bolt.
    3. Fig 1: A/C Clutch Disc & Hub Bolt
    GF0004394Courtesy of FORD MOTOR CO.
  3. Remove the A/C clutch disc and hub.
  4. Remove the A/C clutch disc and hub spacer(s).
  5. Remove the A/C compressor pulley snap ring.
    6. CAUTION: Do not use air tools. Damage to the air conditioning (A/C) compressor pulley or A/C compressor may result.
  6. Remove the A/C compressor pulley.
    1. Install the special tool.
    2. Remove the A/C compressor pulley.
    7. Fig 2: A/C Compressor Pulley
    GF0004395Courtesy of FORD MOTOR CO.
    CAUTION: Do not use air tools. Damage to the air conditioning (A/C) clutch field coil or A/C compressor may result.
  7. Remove the A/C clutch field coil.
    1. Install the special tool.
    2. Install the special tool.
    3. Remove the A/C clutch field coil.
    8. Fig 3: Identifying A/C Clutch Field Coil And Special Tool
    GF0008052Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals