Removal and Installation

WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Only vehicles with a mechanical shift transfer case are equipped with a mode indication switch.

With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING AND LIFTING .
Disconnect the wiring harness connector.

Fig 1: Disconnecting Wiring Harness Connector
Courtesy of FORD MOTOR CO.
Remove the mode indication switch.

Fig 2: Installing Mode Indication Switch
Courtesy of FORD MOTOR CO.
To install, reverse the removal procedure.