Check for Free Rotation

WARNING: This page is about a different car, the 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: The turbocharger must be preoiled before carrying out this check.

NOTE: Turbine and compressor wheels must spin freely when turned by hand. No housing contact is permitted.

Press and rotate the radial shaft, then repeat from the opposite side. If either the compressor wheel or the turbine wheel contacts the housing, the bearings are bad, and a new turbocharger must be installed.