Standard Torques - Class 10.9 Metric Bolts And Studs

WARNING: This page is about a different car, the 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

STANDARD TORQUES - CLASS 10.9 METRIC BOLTS AND STUDS

Thread Diameter	Thread Pitch (mm/thread)	Torque^a
6 mm	1	13 Nm (115 lb-in)
8 mm	1.25	31 Nm (23 lb-ft)
10 mm	1.5	62 Nm (46 lb-ft)
12 mm	1.75	107 Nm (79 lb-ft)
14 mm	2	172 Nm (127 lb-ft)
15 mm	2	216 Nm (159 lb-ft)
16 mm	2	266 Nm (196 lb-ft)
18 mm	2.5	368 Nm (272 lb-ft)
20 mm	2.5	520 Nm (384 lb-ft)

^a Tolerances are ±10% of nominal value.