LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 1291 (Automatic Transmission - 4R70E/W, 4R75E/W) >> In-Vehicle Servicing >> 2-3 Accumulator >> Removal

2-3 Accumulator: Removal

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING AND LIFTING article.
  2. Remove the main control valve body. For additional information, refer to Main Control Valve Body .
  3. Remove the 2-3 accumulator piston retainer.
  4. Fig 1: Removing 2-3 Accumulator Piston Retainer
    GF0003535Courtesy of FORD MOTOR CO.
  5. Remove the accumulator piston and spring.
  6. Fig 2: Removing Accumulator Piston And Spring
    GF0003536Courtesy of FORD MOTOR CO.