Output Shaft And Direct Clutch Cylinder: Notes
WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools
| Illustration | Tool Name | Tool Number |
|---|---|---|
| Compressor, Clutch Spring | 307-015 (T65L-77515-A) | |
| Protector, Piston Seal | 307-080 (T80L-77234-A) | |
| Protector, Transmission Direct Clutch Outer Fluid Seal | 307-422 | |
| Teflon Seal Installer | 307-516 (kit consists of 307-516-1, 307-516-2, 307-516-3 and 307-516-4) | |
| Protector Pilot, Seal | 307-516-1 | |
| Protector, Seal | 307-516-2 | |
| Assembly Pusher | 307-516-3 | |
| Sizer, Seal | 307-516-4 |
Material
| Item | Specification |
|---|---|
| MERCON® V Automatic Transmission Fluid XT-5-QM (or XT-5-QMC) (US); CXT-5-LM12 (Canada) |
MERCON® V |
| Item | Part Number | Description |
|---|---|---|
| 1 | 7F274 | Output shaft-to-direct clutch cylinder seals (2 required) |
| 2 | 7F240 | Direct clutch outer bearing and race assembly No. 8 |
| 3 | 7060 | Output shaft |
| 4 | 7F273 | Output shaft-to-case seals (3 required) |
| 5 | 87054-S94 | O-ring seal |
| 6 | 7A233 | Output shaft ring gear assembly |
| 7 | 7D164 | Output shaft hub |
| 8 | 97713-S | Retaining snap ring |
| 9 | 7C122 | Snap ring |
| Item | Part Number | Description |
|---|---|---|
| 1 | 7F236 | Direct clutch hub |
| 2 | 7F243 | No. 7 direct clutch bearing |
| 3 | 7D483 | Direct clutch pressure plate retaining ring |
| 4 | 7F237 | Direct clutch inner bearing support |
| 5 | 7B066 | Direct clutch pressure plate |
| 6 | 7B442 | Direct clutch external spline plates (steel) |
| 7 | 7B164 | Direct clutch internal spline plates (friction) |
| 8 | 388104-S2 | Retaining ring |
| 9 | 7F235 | Direct clutch retainer and spring assembly |
| 10 | 7A262 | Direct clutch piston |
| 11 | 7C099 | Direct clutch piston inner seal |
| 12 | 7A548 | Direct clutch piston outer seal |
| 13 | 7F283 | Direct clutch cylinder |