LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 1291 (Automatic Transmission - 4R70E/W, 4R75E/W) >> Disassembly And Assembly Of Subassemblies >> Intermediate One-Way Clutch >> Assembly

Intermediate One-Way Clutch: Assembly

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: The intermediate one-way clutch must rotate counterclockwise when installed on the reverse clutch drum and will make a ratchet sound.
  1. Install the intermediate one-way clutch.
    1. Install the intermediate one-way clutch.
    2. Install the snap ring.
    2. Fig 1: Identifying Intermediate One-Way Clutch And Snap Ring
    GF0003618Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals