Steering Column Switches
WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
The steering column switches consist of the following:
- Multifunction switch
- Ignition switch
The steering column switches receive driver inputs and send signals to various components. The multifunction switch controls the windshield wipers, hazard flasher, turn signal, headlamp low/high beam and headlamp dimmer/flash-to-pass. The ignition switch is used in conjunction with the lock cylinder key to start the vehicle. When the lock cylinder key is switched to different positions, it moves linkages which enable the ignition switch to send battery voltage to various components.