LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 1272 (Instrument Cluster (Ic), Message Center, And Warning Chimes) >> Diagnostic Tests >> Instrument Cluster (IC) and Warning Chimes >> Principles of Operation >> Warning Chimes >> Roll Stability Control (RSC) Warning

Roll Stability Control (RSC) Warning

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

The RSC warning chime provides an audible indication to alert the driver that a fault is present in the RSC system. The RSC warning chime is on for 30 seconds from the time when a fault is detected and the SERVICE RSC NOW message is displayed in the integrated circuit display, then turns off for a period of 5 minutes after which the cycle is repeated.

The RSC warning chime inputs are: