LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 1272 (Instrument Cluster (Ic), Message Center, And Warning Chimes) >> Diagnostic Tests >> Instrument Cluster (IC) and Warning Chimes >> Pinpoint Tests >> Pinpoint Test AO: The Roll Stability Control (RSC) Warning Chime is Inoperative >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

The RSC warning chime is on for 30 seconds from the time when a fault in the RSC system is detected and the traction control/stability control warning indicator is on and the SERVICE RSC NOW message is displayed in the integrated circuit display. The RSC chime turns off after 30 seconds and the cycle is repeated after a period of 5 minutes. The RSC warning chime is overridden if there are higher priority chimes that are in operation.

This pinpoint test is intended to diagnose the following:

scientia non olet · About LEMON Manuals