LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 1272 (Instrument Cluster (Ic), Message Center, And Warning Chimes) >> Diagnostic Tests >> Instrument Cluster (IC) and Warning Chimes >> Pinpoint Tests >> Pinpoint Test AI: DTC U0101 - Lost Communication With TCM >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

The instrument cluster (IC) sets DTC U0101 if data messages received from the transmission control module (TCM) (part of the PCM) over the high speed controller area network (HS-CAN) are missing for greater than 5 seconds. For a complete list of all network messages, refer to MODULE COMMUNICATIONS NETWORK article.

This pinpoint test is intended to diagnose the following: