Safety Belt Twisted at the Safety Belt Guide

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: These procedures apply to both wire-formed and stamped D-ring designs.

Grasp the belt webbing at the shoulder belt guide (D-ring).
Rotate and fold the belt webbing over itself to remove the twist.
Feed the folded portion of the belt through the safety belt guide (D-ring).

Fig 1: Rotating And Folding The Belt Webbing

Courtesy of FORD MOTOR CO.

When completed, the safety belt should look like the illustration.

Fig 2: Identifying Safety Belt

Courtesy of FORD MOTOR CO.