LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 1265 (Safety Belt System) >> Description And Operation >> Safety Belt System >> Safety Belt Buckles >> Rear Safety Belt Buckles

Rear Safety Belt Buckles

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

The rear bucket seat safety belt buckles are mounted to the seat cushion frames and are serviceable in-vehicle.

The rear bench seats are equipped with a dual safety belt buckle assembly used for the center and RH seat positions on the 3-passenger bench and both center seat positions on the 4-passenger bench. The rear safety belt buckles are mounted to the seat cushion frame. The LH safety belt buckle on the rear 3-passenger bench seat is part of the center safety belt retractor and is not serviced separately. To remove the LH safety belt buckle on the rear 3-passenger bench seat, refer to Safety Belt Retractor - Rear, Center, 3-Passenger Bench Seat . The outboard safety belt buckles on the rear 4-passenger bench seat are part of the safety belt retractors and are not serviceable. To remove the outboard safety belt buckles on the rear 4-passenger bench seat, refer to Safety Belt Retractor - Rear, Center, 4-Passenger Bench Seat .