LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 1263 (Exterior Lighting System) >> Removal And Installation >> Daytime Running Lamps (DRL) Module >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the 2 bolts and the daytime running lamps (DRL) module.
    • Disconnect the electrical connector.
  2. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals