LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 1258 (Handles, Locks, Latches And Entry Systems) >> Removal And Installation >> Sliding Door Latch - Lower >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the 2 screws and the lower sliding door latch cover.
    2. Fig 1: Lower Sliding Door Latch
    GF0011466Courtesy of FORD MOTOR CO.
  2. Disconnect the cable from the lower sliding door latch.
  3. Remove the bolt, the nut, and the lower sliding door latch.
    • To install, tighten to 12 Nm (9 lb-ft).
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals