Rear Ride Height Measurement
WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
| Item | Part Number | Description |
|---|---|---|
| 1 | - | Ride height = A - B |
| 2 | - | Measurement point A |
| 3 | - | Measurement point B |
NOTE:
Make sure that the vehicle is positioned on a flat, level surface and the tires are inflated to the correct pressure. Vehicle should have a full tank of fuel.
- To obtain rear ride height, measure the distance between points A (frame flange turn down lip at jounce bumper) and B (top of the axle tube). For additional information, refer to SPECIFICATIONS .