LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 1191 (Manual Transmission) >> In-Vehicle Servicing >> Halfshaft Seal >> Installation

Halfshaft Seal: Installation

WARNING: This page is about a different car, the 2008 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using the special tool, install the halfshaft oil seal.
  2. Fig 1: Installing Oil Seal
    GF0025324Courtesy of FORD MOTOR CO.
    CAUTION: Make sure to use the seal protector when installing the RH intermediate shaft and the LH halfshaft. Failure to use the seal protector may result in transmission oil leaks.
  3. Install the RH intermediate shaft or LH halfshaft. For additional information, refer to FRONT DRIVE HALFSHAFTS article.