LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 1186 (Information Center) >> Removal And Installation >> Message Center Switch >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2008 Mercury Mariner and 2008 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

All vehicles 

  1. Remove the LH instrument panel trim panel.

    2. Hybrid vehicles 

  2. Remove the jump start switch screw and position the jump start switch aside.

    3. All vehicles 

  3. Press the retaining tabs and remove the message center switch.
    • Disconnect the electrical connector.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals