P0223 - Throttle/Pedal Position Sensor/Switch B Circuit High
WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2008 Mercury Sable, 2008 Mercury Mountaineer, 2008 Mercury Milan, 2008 Mercury Mariner, and 2008 Mercury Grand Marquis. However, it is still accessible from the selected car via links, so may be relevant.
P0223 - THROTTLE/PEDAL POSITION SENSOR/SWITCH B CIRCUIT HIGH
| Description: | The electronic throttle control (ETC) throttle position (TP) sensor 2 circuit was flagged as a concern by the powertrain control module (PCM) indicating a high voltage. | |||
| Possible Causes: |
|
|||
| Diagnostic Aids: | This concern exhibits a symptom of limited power. A TP2 PID reading greater than 4.75 volts in key ON, engine OFF or key ON, engine running indicates a concern is present. | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory | |
| All | refer to PINPOINT TEST DV . | |||