Child Safety Seat Tether Anchors
WARNING: This page is about a different car, the 2007 Mercury Mariner and 2007 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
The child safety seat tether anchor/bolt MUST
be securely tightened to specification. Otherwise, the child safety seat may not be correctly secured and the child could be injured if the vehicle is involved in a collision or stops suddenly.
The child safety seat tether anchors are attached to the roof near the rear liftgate.
If the child safety seat tether anchors were in use during a collision, inspect and install new anchors as necessary. Return the vehicle structure to its original production configuration.