External Sealing
WARNING: This page is about a different car, the 2007 Mercury Mariner and 2007 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
This transaxle has the following parts to prevent external fluid leakages:
- Gaskets
- Lip type seals
- O-rings
- Seal rings
| Item | Part Number | Description |
|---|---|---|
| 1 | 7F401 | Seal assembly - converter impeller hub |
| 2 | 7A137 | Pipe plug - 1/8-27 dry seal case (pressure taps - 4 required) |
| 3 | 7D273 | Connector assembly - 3/8-18 cooler line fitting (2 required) |
| 4 | 7B353 | Gasket - transaxle split flange |
| 5 | 7F337 | Seal assembly - manual control |
| 6 | 7A020 | Indicator assembly - fluid level |
| 7 | 7N243 | Grommet - fluid filler tube |
| 8 | 7G331 | Gasket - pump body separator |
| 9 | 7B498 | Seal - manual control lever |
| 10 | - | Lever assembly - manual control |
| 11 | N605903-S36 | Bolt - M8 - 1.25 x 17 hex flange head (attaches manual control lever) |
| 12 | 1177 | Seal assembly - differential (2 required) |
| 13 | 7Z101 | O-ring - transmission speed sensor |
| 14 | 7A248 | Seal - pump O-ring |
| 15 | 7N279 | Plug - 1/4-18 dry seal tapered thread (line pressure) |
| 16 | 7D027 | Cover assembly - intermediate overdrive servo |
| 17 | 7F396 | Gasket - main control cover |
| 18 | 7A246 | Vent assembly - main control cover |