LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 1058 (Climate Control) >> Removal And Installation >> Clutch and Clutch Field Coil - Hybrid >> Removal

Clutch and Clutch Field Coil - Hybrid: Removal

WARNING: This page is about a different car, the 2007 Mercury Mariner and 2007 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the A/C compressor. For additional information, refer to Air Conditioning (A/C) Compressor - Hybrid  .
  2. Remove the A/C clutch disc and hub nut.
    1. Using the special tool, hold the A/C clutch disc and hub.
    2. Remove the A/C clutch disc and hub nut
    3. Fig 1: A/C Clutch Disc & Hub Nut
    GF0012696Courtesy of FORD MOTOR CO.
  3. Remove the A/C compressor pulley snap ring.
    4. CAUTION: Do not use air tools. Damage to the A/C clutch pulley or A/C compressor may result.
  4. Using the special tool, remove the A/C clutch pulley.
    5. Fig 2: A/C Clutch Field Coil
    GF0012697Courtesy of FORD MOTOR CO.
  5. Remove the A/C clutch field coil snap ring.
  6. Remove the A/C clutch field coil.
    1. Remove the bolt.
    2. Remove the thermal limiter and A/C clutch field coil.
    7. Fig 3: Thermal Limiter & A/C Clutch Field Coil
    GF0018065Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals