LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 1035 (Transfer Case - Power Transfer Unit (PTU)) >> Removal >> Intermediate Shaft Seal

Intermediate Shaft Seal

WARNING: This page is about a different car, the 2007 Mercury Mariner and 2007 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOL REFERENCE

G06095027Courtesy of FORD MOTOR CO.
 Remover, Halfshaft Oil Seal
308-428
G06064377Courtesy of FORD MOTOR CO.
 Slide Hammer
100-001 (T50T-100-A)
  1. Remove the Power Transfer Unit (PTU). For additional information, refer to Power Transfer Unit (PTU) - Automatic Transaxle  or Power Transfer Unit (PTU) - Manual Transaxle .
  2. Using the Halfshaft Oil Seal Remover and Slide Hammer, remove the intermediate shaft seal.
    Fig 1: Removing Intermediate Shaft Seal
    G06095084Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals