Parking Aid Sensor: Installation
WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
- Insert the sensor in the opening until the retaining tabs lock in position.
- Connect the electrical connector.
- After installing the sensor(s), use the scan tool to verify that the parking aid sensor PIDs read no object present, 255 cm (100 in) and that the parking aid sensor attenuation PIDs read between 0-16 micro-seconds.