Manual Transmission
WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
The manual transmission fluid cooling system consists of:
- an in-tank fluid cooler inlet tube.
- a non-repairable in-tank transmission fluid cooler.
- an in-tank fluid cooler return tube.
The transmission fluid flows from the transmission bottom fitting to the in-tank transmission fluid cooler and returns to the transmission through the top fitting.
For fluid cooler flow testing, refer to Transmission Fluid Cooler Flow Test - Manual Transmission in this article. For fluid cooler backflushing and cleaning, refer to Transmission Fluid Cooler - Backflushing and Cleaning - Manual Transmission in this article.
| Item | Part Number | Description |
|---|---|---|
| 1 | - | Fluid inlet |
| 2 | - | Fluid outlet |
| 3 | 388160-S101 | C-clip (5.4L, 6.8L) |
| 4 | 7A031 | In-tank fluid cooler return tube (5.4L, 6.8L) |
| 5 | 7A030 | In-tank fluid cooler inlet tube (5.4L, 6.8L) |
| 6 | 7N291 | Fluid cooler tube bracket (6.0L) |
| 7 | 7N291 | Fluid cooler tube bracket (5.4L, 6.8L) |
| 8 | 7N291 | Fluid cooler tube clip |
| 9 | W704723 | Nut (6.0L) |
| 10 | W701815 | Stud (6.0L) |
| 11 | 7H420 | Tube and bracket assembly (6.0L) |