LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 1013 (Hydraulic Brake System Actuation -- F250-F550 Super Duty) >> Removal And Installation >> Brake Master Cylinder >> Removal And Installation >> All vehicles

All vehicles

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the fluid level sensor connector.
  2. If equipped, disconnect the brake pressure switch and the trailer brake control transducer electrical connectors.
  3. Disconnect the brake tube-to-master cylinder fittings.
    • To install, tighten to 18 Nm (13 lb-ft).


  1. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals