LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 1013 (Hydraulic Brake System Actuation -- F250-F550 Super Duty) >> Removal And Installation >> Brake Master Cylinder >> Notes

Brake Master Cylinder: Notes

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
Material

Item Specification
High Performance DOT 3 Motor Vehicle Brake Fluid
PM-1 or PM-1-C (US); CPM-1 or CPM-1-C (Canada)
ESA-M6C25-A or WSS-M6C62-A
NOTE: Master cylinder with vacuum brake booster shown, Hydro Boost® similar. Master cylinder with trailer brake control shown, all others similar.
Fig 1: Exploded View Of Brake Master Cylinder
GF0006720Courtesy of FORD MOTOR CO.
Item Part Number Description
1 - Brake tube-to-master cylinder fittings (2 required)
2 382802 Master cylinder nut (2 required)
3 - Trailer brake control electrical connectors (if equipped)
4 2140 Brake master cylinder