LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine - 3.0L V6 - VIN U & 2 >> Removal & Installation >> Water Pump >> Removal

Water Pump: Removal

  1. Disconnect negative battery cable. Drain cooling system. Loosen water pump pulley bolts. Remove accessory drive belts.
  2. Remove automatic tensioner. Disconnect coolant hoses from water pump. Remove retaining bolts, water pump and gasket. See Fig 1.
Fig 1: Exploded View Of Water Pump
G95E13353Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals