LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine - 3.0L V6 - VIN U & 2 >> Removal & Installation >> Timing Chain >> Removal

Timing Chain: Removal

Remove front cover. See FRONT COVER . Rotate crankshaft until cylinder No. 1 is on TDC of compression stroke and timing marks are aligned. See Figure. Remove camshaft gear retaining bolt and washer. Remove timing chain and gears as an assembly.

CAUTION: DO NOT replace camshaft bolt with standard bolt. Bolt has a drilled oil passage.
scientia non olet · About LEMON Manuals