LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine - 3.0L V6 - VIN U & 2 >> Removal & Installation >> Front Cover Oil Seal >> Removal

Front Cover Oil Seal: Removal

  1. Disconnect negative battery cable. Remove accessory drive belts. Raise and support vehicle. Remove right front wheel.
  2. Remove 4 retaining bolts and crankshaft pulley. Remove crankshaft damper retaining bolt. Using Crankshaft Damper Remover (T58P-6316-D) and Adapter (T82L-6316-B), remove crankshaft damper. Using Seal Remover (T77L-9533-B), carefully remove seal from front cover to prevent damaging sealing surfaces.
scientia non olet · About LEMON Manuals