LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine - 3.0L V6 - VIN U & 2 >> Removal & Installation >> Cylinder Head >> Inspection

Cylinder Head: Inspection

  1. Inspect cylinder head for cracks or warpage. Machine cylinder head if warpage exceeds specification. See CYLINDER HEAD SPECIFICATIONS  table under ENGINE SPECIFICATIONS.
    CAUTION: Do not machine more than .010" (.25 mm) from original cylinder head or cylinder block surface.
  2. Check cylinder block deck surface. Machine cylinder block if warpage exceeds specification. See CYLINDER BLOCK  table under ENGINE SPECIFICATIONS.
scientia non olet · About LEMON Manuals