LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine - 3.0L V6 - VIN U & 2 >> Removal & Installation >> Camshaft >> Removal

Removal & Installation: Camshaft: Removal

  1. Remove engine from vehicle. See ENGINE . Remove intake manifolds. See INTAKE MANIFOLD . Remove valve lifters. See VALVE LIFTER . Remove timing chain. See TIMING CHAIN .
  2. Check camshaft end play. If camshaft end play is not within specification, replace thrust plate. See CAMSHAFT  table under ENGINE SPECIFICATIONS.
  3. Remove camshaft thrust plate retaining bolt. Remove camshaft. If replacing camshaft bearings, remove rear camshaft bore plug. Using Camshaft Bearing Set (T65L-6250-A), remove camshaft bearings.
scientia non olet · About LEMON Manuals