LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Mustang Base, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 74 (Engine Removal, Overhaul & Installation -- ECONOLINE, Excursion & F250-F550 Super Duty - Diesel 7.3L (99F E Series & 99F F450/550)) >> Motors, Relays & Solenoids >> Glow Plug Relay >> Removal & Installation

Removal & Installation

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2002 Ford RV Cutaway, 2002 Ford Pickup, 2002 Ford F550 Super Duty, 2002 Ford F450 Super Duty, and 2002 Ford Excursion. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect negative battery cable. Remove glow plug relay terminal cover. Remove wiring nuts and wiring from relay. Remove 2 glow plug relay retaining nuts. See Fig 1. Remove relay and inspect plastic base for cracks. To install, reverse removal procedure. Tighten mounting nuts and cable connections to specification. See TORQUE SPECIFICATIONS .

Fig 1: Removing & Installing Glow Plug Relay
G00248212Courtesy of FORD MOTOR CO.