LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Mustang Base, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1726 (Front Suspension - Rear Wheel Drive (RWD) -- F250-F550 Super Duty) >> Removal And Installation >> Wheel Studs - Single Rear Wheel (SRW) >> Removal

Wheel Studs - Single Rear Wheel (SRW): Removal

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the wheel hub and brake disc assembly. For additional information, refer to Wheel Bearing and Wheel Hub - F-250, F-350  in this article.
  2. Using a suitable press, remove and discard the wheel stud.
    Fig 1: Removing Wheel Stud From Brake Disc Using Suitable Press
    GF0006118Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals