LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Mustang Base, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1726 (Front Suspension - Rear Wheel Drive (RWD) -- F250-F550 Super Duty) >> Removal And Installation >> Radius Arm Bushing - F-450, F-550 >> Installation

Radius Arm Bushing - F-450, F-550: Installation

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the new bushing into the axle assembly.
  2. Using the special tools, install the radius arm bushing.
    Fig 1: Installing Radius Arm Bushing
    GF0006136Courtesy of FORD MOTOR CO.
  3. Install the radius arm. For additional information, refer to Radius Arm - F-450, F-550  in this article.
scientia non olet · About LEMON Manuals