Diagnostic Aids
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2003 Ford RV Cutaway, 2003 Ford Pickup, 2003 Ford F550 Super Duty, 2003 Ford F450 Super Duty, and 2003 Ford Excursion. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
After each service or repair procedure has been completed, reconnect all components. Clear DTCs and repeat QUICK TEST procedures to ensure all electronic engine control systems are working properly and DTCs are no longer present.
NOTE:
BPP switch may also be referred to as Brake On/Off (BOO) or brakelight switch.
Perform this test when directed by QUICK TEST. This test is intended to diagnose a faulty BPP switch circuit or PCM. This test is only intended to diagnose the following components and circuits:
- Brake Pedal Position (BPP) Wiring Harness Circuit
- Powertrain Control Module (PCM)
Brakelight switch or BPP input is wired to brakelight circuit and informs PCM when brake pedal is applied. BPP input is used to disengage speed control or auxiliary powertrain control systems.