Removal & Installation
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2002 Ford RV Cutaway, 2002 Ford Pickup, 2002 Ford F550 Super Duty, 2002 Ford F450 Super Duty, and 2002 Ford Excursion. However, it is still accessible from the selected car via links, so may be relevant.
Remove air inlet duct. Remove turbocharger compressor manifold. Remove fuel/water separator. Disconnect wiring from injector control pressure solenoid. Remove nut securing injection control pressure solenoid to high pressure oil pressure regulator. Remove high pressure oil pressure regulator from high pressure oil pump. See Fig 1. To install, reverse removal procedure. Tighten high pressure oil pressure regulator to 35 ft. lbs. (47 N.m).