LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Mustang Base, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1788 (Fuel Charging And Controls - Turbocharger -- F250-F550 Super Duty 6.0L (99P F450/550)) >> Diagnostic Tests >> Turbocharger >> Component Tests >> Check Axial End Play

Check Axial End Play

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Radial shaft movement cannot readily be measured on this turbocharger.
  1. Position the dial indicator on the turbine end of the radial shaft and zero the indicator.
  2. Move the radial shaft back and forth by hand and record the reading.
  3. If readings exceed specifications, install a new turbocharger.
    4. Fig 1: Positioning Dial Indicator On Turbine End Of Radial Shaft
    GF0005939Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals