S130 axles

WARNING: This page is about a different car, the 2007 Ford F550 Super Duty and 2007 Ford F450 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.

Remove the outer side gear.

Fig 1: Removing Outer Side Gear
Courtesy of FORD MOTOR CO.
Remove the differential shaft lockpins by turning the differential case opening facing down. Using a hammer, lightly tap the side of the case to free the lockpins.

Fig 2: Removing Differential Shaft Locking Pins
Courtesy of FORD MOTOR CO.
Remove the lockpins.

Fig 3: Removing Locking Pins
Courtesy of FORD MOTOR CO.
Remove the halfshaft pinion shafts, pinions and washers.
- Remove the halfshaft.
- Remove the pinion and washer.
Fig 4: Removing Halfshaft Pinion Shafts, Pinions And Washers
Courtesy of FORD MOTOR CO.
Remove the full shaft pinion shaft, pinions and washers.

Fig 5: Removing Full Shaft Pinion Shaft, Pinions And Washers
Courtesy of FORD MOTOR CO.
Remove the inner side gear and thrust washer.

Fig 6: Identifying Inner Side Gear And Thrust Washer
Courtesy of FORD MOTOR CO.