LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Mustang Base, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1717 (Rear Drive Axle/Differential - DANA S110 & S130 -- F450-F550 Super Duty) >> Disassembly And Assembly >> Differential Case and Ring Gear >> Disassembly >> S110 axles

S110 axles

WARNING: This page is about a different car, the 2007 Ford F550 Super Duty and 2007 Ford F450 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
  1. With a conventional differential, lift out the side gear.
    Fig 1: Identifying Outer Side Gear
    GF0006421Courtesy of FORD MOTOR CO.
  2. Remove the differential pinion cross shaft lockpin.
    Fig 2: Locating Differential Pinion Cross Shaft Lock Pin
    GF0006422Courtesy of FORD MOTOR CO.
  3. CAUTION: Discard all gears in sets if one or more sustains wear or damage or damage to components may occur.
    Fig 3: Identifying Pinion Cross Shaft
    GF0006423Courtesy of FORD MOTOR CO.
  4. Remove the pinion cross shaft.
  5. Remove the inner side gear and thrust washer.
    Fig 4: Identifying Inner Side Gear And Thrust Washer
    G03918581Courtesy of FORD MOTOR CO.