LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Mustang Base, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1391 (Engine - 6.0L (99P F450/550) Diesel -- F250-F550 Super Duty) >> In-Vehicle Repair >> Oil Pan - Upper >> Installation

Oil Pan - Upper: Installation

WARNING: This page is about a different car, the 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position a new press-in-place gasket, the upper oil pan and install the bolts.
    • Tighten to 13 Nm (10 lb-ft).
      Fig 1: Identifying Upper Oil Pan Bolts
      G03887278Courtesy of FORD MOTOR CO.
  2. Install the lower oil pan. For additional information, refer to OIL PAN - LOWER .
scientia non olet · About LEMON Manuals