LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Mustang Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Electrical >> Gauges >> Instrument Panels - Analog >> System Tests >> Test H: Odometer Inoperative

Test H: Odometer Inoperative

NOTE: Instrument cluster received odometer signal from Powertrain Control Module (PCM) through the Standard Corporate Protocol (SCP) bus circuit. PCM receives vehicle speed signal from output shaft sensor. If instrument cluster does not receive odometer rolling count status for two seconds, dashes will be displayed in odometer display.

Turn ignition switch to RUN position. If odometer displays all dashes, repair odometer input from PCM (retrieve codes from PCM). See appropriate SELF-DIAGNOSTICS article in ENGINE PERFORMANCE. If odometer does not display all dashes, replace instrument cluster.

scientia non olet · About LEMON Manuals