LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Focus LX, Standard >> Repair and Diagnosis (Single Page) >> Suspension >> Rear Suspension System >> Removal & Installation >> Wheel Bearing >> Wheel Bearing - Vehicles With: Rear Disc Brakes >> Installation >> Vehicles with anti-lock brakes

Vehicles with anti-lock brakes

CAUTION: Avoid any impact on the wheel speed sensor ring.
CAUTION: Make sure the wheel speed sensor ring is clean.
CAUTION: Avoid any contact between the wheel speed sensor ring and a magnetic surface.
NOTE: Install a new wheel speed sensor ring.

Using the special tool, install the wheel speed sensor ring.

Fig 1: Installing Wheel Speed Sensor Ring (Disc Brake)
G00370601Courtesy of FORD MOTOR CO.