LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Focus LX, Standard >> Repair and Diagnosis (Single Page) >> Suspension >> Rear Suspension System >> Removal & Installation >> Wheel Bearing >> Wheel Bearing - Vehicles With: Rear Disc Brakes >> Installation >> All vehicles

All vehicles

  1. Using the special tool, install a new wheel bearing.
    Fig 1: Installing Wheel Bearing (Disc Brake)
    G00370599Courtesy of FORD MOTOR CO.
  2. Install the circlip.
  3. Using the special tools, install the water seal carrier.
    Fig 2: Installing Water Seal Carrier (Disc Brake)
    G00370600Courtesy of FORD MOTOR CO.


    NOTE: Install a new wheel spindle.
  1. Install the wheel spindle.
  2. Install the wheel hub. For additional information, refer to WHEEL HUB .
scientia non olet · About LEMON Manuals